P: 727.808.5106 W: www.bashperformance.com E: sales@brettbash.com (For ordering and questions, please contact us)
	{ Bash Performance 05-09 Mustang Body Parts }                    • GT-SR Polyurethane Front Bumper: $310 This race inspired bumper engineered and designed by Bash Performance will give your Mustang an aggressive and yet clean look that will surely turn heads! Not only aesthetically designed, but fully functional to achieve maximum performance. The GT-SR bumper improves aerodynamics, reduces lift, increases downforce, and cools the brakes using its side vents. Along with the original design, the quality and fit is ensured by the fact that it is manufactured of high quality urethane helping you guard against damages that can be caused by everyday driving hazards. The bumper has a factory fit and finish. Works with OEM grilles and headlights; billet aluminum grilles, projector headlights, and PIAA driving lights are available separately.           • GT-SR Polyurethane Rear Lower Valance: $220 Along with the original design, the quality and fit is ensured by the fact that it is manufactured of high quality urethane helping you guard against damages that can be caused by everyday driving hazards. The valance has a factory fit and finish; it attaches to the factory rear bumper.              • M-SR Polyurethane Rear Lower Valance: $220 The valance has a factory fit and finish; it attaches to the factory rear bumper. This lower valance is designed to work with either the factory or an aftermarket rear exhaust system. Along with the original design, the quality and fit is ensured by the fact that it is manufactured of high quality urethane helping you guard against damages that can be caused by everyday driving hazards.              • M-SR Polyurethane Side Skirts: $310 Along with the original design, the quality and fit is ensured by the fact that it is manufactured of high quality urethane helping you guard against damages that can be caused by everyday driving hazards. Sold in a pair.                    • GT-SR Fiberglass Hood: $520 This is a fully functional ram-air hood with an air duct run from the dual front vents into the under-hood factory cold air intake area. The hood will work with just about any supercharger, turbo system, or cold air kit. Includes fully bonded billet aluminum drilled and tapped hinge plates, which ensure a vibration free fitment. The GT-SR Hood is crafted from hi-temp, hand laid fiberglass for exceptional strength and durability. Installation is straightforward using the stock hardware. Comes in a primer-gelcoat. Installing hood pins is highly recommended; we offer the Aerocatch Hood Pin Latch System which is sold separately.                       • GT-SR Carbon Fiber Hood: Contact Us This is a fully functional carbon fiber ram-air hood with an air duct run from the dual front vents into the under-hood factory cold air intake area. The hood will work with just about any supercharger, turbo system, or cold air kit. Includes fully bonded billet aluminum drilled and tapped hinge plates, which ensure a vibration free fitment. Each hood is manufactured using the finest hand-laid materials to provide superior strength and durability. They are coated with .020" of ultra UV resistant clear gelcoat, fully buffed and polished for an excellent visual finish. Detailed instructions provide a straight-forward installation that uses stock hardware for an easy fit and installation. For best results we suggest a clear-coat be applied prior to installation. Installing hood pins is highly recommended; we offer the Aerocatch Hood Pin Latch System which is sold separately.           • M-SR Fiberglass Hood: Contact Us This is a fully functional ram-air hood with an air duct run from the dual front vents into the under-hood factory cold air intake area. The hood will work with just about any supercharger, turbo system, or cold air kit. Includes fully bonded billet aluminum drilled and tapped hinge plates, which ensure a vibration free fitment. The GT-SR Hood is crafted from hi-temp, hand laid fiberglass for exceptional strength and durability. Installation is straightforward using the stock hardware. Comes in a primer-gelcoat. Installing hood pins is highly recommended; we offer the Aerocatch Hood Pin Latch System which is sold separately.     • M-SR Carbon Fiber Hood: Contact Us This is a fully functional carbon fiber ram-air hood with an air duct run from the dual front vents into the under-hood factory cold air intake area. The hood will work with just about any supercharger, turbo system, or cold air kit. Includes fully bonded billet aluminum drilled and tapped hinge plates, which ensure a vibration free fitment. Each hood is manufactured using the finest hand-laid materials to provide superior strength and durability. They are coated with .020" of ultra UV resistant clear gelcoat, fully buffed and polished for an excellent visual finish. Detailed instructions provide a straight-forward installation that uses stock hardware for an easy fit and installation. For best results we suggest a clear-coat be applied prior to installation. Installing hood pins is highly recommended; we offer the Aerocatch Hood Pin Latch System which is sold separately.              • Carbon Fiber Rear Decklid Cover: $200 Spice up the rearward appearance of your 05-09 Mustang with our Carbon Fiber Rear Decklid Cover. Designed to be nothing less than perfect, this is not a flimsy stick on unit, rather we spent the time to engineer a two piece cored structure. The outer skin is the same 6k carbon fiber which graces our hoods and all other carbon fiber products, and the inner structure is a press molded thermoplastic reinforcement which stabilizes and provides the appropriate mounting locations. They are coated with .020" of ultra UV resistant clear gelcoat, fully buffed and polished for an excellent visual finish. For best results we suggest a clear-coat be applied prior to installation.                       • Carbon Fiber Intake Manifold Cover: $290 This gorgeous cover is crafted using premium 6k carbon fiber, a special temperature resistant resin system, and un ultra UV resistant clear gelcoat. The cover is designed to mount using factory locations. Covers are pre-drilled, fully polished, and waxed. For best results we suggest a clear-coat be applied prior to installation. Only for V8 Mustangs.                       • Carbon Fiber Radiator Cover: Contact Us This attractive and functional cover will change forever the appearance of your Mustang's engine bay. Open your hood and you will be greeted with perfectly aligned carbon fiber and a generous helping of ultra UV resistant gelcoat. This cover not only looks good, but also increases the efficiency of the built in under hood cooling system. Our cover will prevent stray air from diverting around the radiator; the increased air charge through the radiator core will lead to improved cooling and reduced combustion temperatures. Our cover mounts using the OEM hardware in just minutes! For best results we suggest a clear-coat be applied prior to installation.                    • GT-SR Spyder Fiberglass Tonneau Cover: $550 The GT-SR Spyder Tonneau Cover was designed with the convertible enthusiast in mind. It provides a sporty look while maintaining the original lines of the car. Made in two pieces, it is easily removed and stored. The Tonneau Cover is crafted from hi-temp, hand laid fiberglass for exceptional strength and durability. Hardware and painting instructions are included. Installation requires no modifications to the car. Comes in a primer-gelcoat. The aluminum bars in the pictures are not includes, those were custom modifications added on.     • GT-SR Spyder Fiberglass Fountain Cover: $65 The Fountain Cover was designed to work with the Tonneau cover. The Cover is made of fiberglass and requires no modifications to the car. Hardware and painting instructions are included.     • GT-SR Spyder Carbon Fiber Tonneau Cover: Contact Us The GT-SR Spyder Tonneau Cover was designed with the convertible enthusiast in mind. It provides a sporty look while maintaining the original lines of the car. Made in two pieces, it is easily removed and stored. This gorgeous cover is crafted using premium 6k carbon fiber, a special temperature resistant resin system, and un ultra UV resistant clear gelcoat. Hardware and painting instructions are included. Installation requires no modifications to the car. • GT-SR Spyder Carbon Fiber Fountain Cover: Contact Us The Fountain Cover was designed to work with the Tonneau cover. The Cover is made of carbon fiber and requires no modifications to the car. Hardware and painting instructions are included. { RK Sport 05-09 Mustang Body Parts }         • Carbon Fiber Rear Decklid: $165 Component is crafted from hi-temp, hand laid carbon fiber for exceptional strength, durability and an outstanding fit and finish.           • California Dream Polyurethane Front Bumper: $390 Along with the original design, the quality and fit is ensured by the fact that it is manufactured of high quality urethane helping you guard against damages that can be caused by everyday driving hazards.           • California Dream Fiberglass Fenders: $450 The fenders are crafted from only the highest quality American made materials. Each set is hand layered, and held to aircraft quality standards. They come in a primer gel-coat and are mounted just like factory. Fenders are sold in a pair.        • California Dream Spoiler: $280 RKSport's Spoiler for the 05-09 Mustang was modeled in-house to add an exciting new look to the Mustang. As with all RKSport wings this latest creation is constructed from premium materials and hand laid to ensure the ultimate in quality.The Spoiler is a straightforward install. Each wing is shipped complete with detailed instructions.     • Quarter Panel Scoops: $150 New Urethane parts fit the V-6 and V-8 model Mustangs. These parts are styled to grab the attention of Mustang lovers everywhere! Virtually indestructible and ready for prep and paint. These come in a pair.     • Window Scoops: $150 New Urethane parts fit the V-6 and V-8 model Mustangs. These parts are styled to grab the attention of Mustang lovers everywhere! Virtually indestructible and ready for prep and paint. These come in a pair.